Home > Etching >

Printmaking Tray
Printmaking Tray


 
Alternative Views:
Item # Overall Tray Dimension Capacity
32216 8 7/8 x 6 7/8 x 1 1/2" 5 x 7"
32217 13 7/8 x 11 3/8 x 2 1/4" 8 x 10"
32218 15 5/8 x 13 5/8 x 2 1/2" 10 x 12"
32221 17 7/8 x 14 5/8 x 2 3/4" 11 x 14"
32219 20 7/8 x 17 3/4 x 3 1/8" 14 x 17"
32222 24 x 20 x 3 1/8" 16 x 20"
32220 26 1/4 x 22 1/4 x 3 1/8" 18 x 22"
32223 28 x 24 x 3 1/4" 20 x 24"
32224 32 7/8 x 27 3/4 x 4 1/4" 23 x 28"
32225* 47 1/4 x 37 1/4 x 4 1/4" 32 x 42"
* This tray ships Over-sized.
It is suggested that you order this item separate
if ordering multiple items.

Polyethylene Trays

These high density polyethylene trays are great for etching plate, soaking paper, or developing photosensitive plate. Not recommended for KPR or Pre-sensitized Zinc Developer.
Capacity: The capacity of the tray is the maximum size of a rigid object, like a copper plate, that will lay flat on the bottom of the tray without contacting the curved sides of the tray.
For example: A standard 22" x 30" sheet of paper can be soaked in a 23" x 28" tray, please note that the paper will not lay flat in the tray bottom, having a gently curve up the side of the tray.
Overall tray dimension: The outside dimensions of the trays.

Item# Item Name Price Quantity Add
32216 Printmaking Tray 5 X 7 in.
$9.00
32217 Printmaking Tray 8 X 10 in.
$14.00
32218 Printmaking Tray 10 X 12 in.
$20.00
32221 Printmaking Tray 11 X 14 in.
$21.00
32219 Printmaking Tray 14 X 17 in.
$31.00
32222 Printmaking Tray 16 X 20 in.
$41.00
32220 Printmaking Tray 18 X 22 in.
$60.00
32223 Printmaking Tray 20 X 24 in.
$62.00
32224 Printmaking Tray 23 X 28 in.
$91.00
32225 Printmaking Tray 32 X 42 in.
$149.00
Check the items you wish to purchase, then click


Features:

Etching Tray

Polyethylene trays used for normal concentrations of acids to etch copper plate and zinc plate.

Paper Soaking Tray

Soaking paper in these trays is convienent, easily transported to convient press side location. Note: Larger trays are difficult to move when full of water, fill and empty large trays where they will be used.

Plate Developing Tray

Excellent tray for developing photolitho or photopolymer plates. Consider the use of magnetic support material in this tray to hold steel backed KM photopolymer plate and solar plate during wash out.

Photo Developing Tray

Suitable as developing trays for traditional photography in the darkroom.



Care and Use:
These high density polyethylene trays are great for etching plate, soaking paper, or developing photosensitive plate.
Not recommended for KPR or Pre-sensitized Zinc Developer.
Share your knowledge of this product. Be the first to write a review »