Home > Etching Supplies > Press Supplies
Sort By:
Page of 1
Felt Etching Blankets Felt Etching Blankets

Our Felt Blankets are of a very high quality 100% wool. A set of 3 blankets consists of a sizing catcher, a pusher, and a cushion. A set of 4 is advisable to have an extra sizing catcher since this blanket does become soiled.

Usually Ships in 1 to 2 Business Days
Floor Model Casters Floor Model Casters

Custom built casters used to aid in transportation of Floor Model Presses.
Set of 4 with a 900 lb load rating each.

Usually Ships in 2 to 3 Weeks
Price: $425.00
Floor Model Protective Bed Cover Floor Model Protective Bed Cover

Used to protect the Registration Grid from damage.
Polycarbonate: This material will not crack under pressure like acrylic will.
The drawback is under heavy pressures polycarbonate will become slightly spongy causing a pressure loss on the press

Usually Ships in 1 to 2 Business Days
Oiler, Grease, Grease Gun Grease Cartridge

14 oz. grease cartridge refill

Usually Ships in 1 to 2 Business Days
Price: $6.95
Magnetic Registration Support Material Magnetic Registration Support Material

Photopolymer Plate Magnetic Registration Support Material:
.030” thick magnetic sheet material may be used with Solar or KM steel backed photopolymer plates.
The sheet is printed with inch increment marks that allow you to register your plate and paper.
The magnetic backing reduces any plate skip that might occur.

Usually Ships in 1 to 2 Business Days
Magnetic Support Material Magnetic Support Material

Photopolymer Plate Magnetic Support Material:
.030” thick magnetic sheet material may be used with Solar or KM steel backed photopolymer plates.
The sheet may be used in your developing trays and on your inking and wiping areas to hold plates secure.

Usually Ships in 1 to 2 Business Days
Oiler, Grease, Grease Gun Press Lubrication Kit

For basic lubrication maintenance of your press.

Usually Ships in 1 to 2 Business Days
Price: $42.00
Registration Grids Registration Grids

These Takach Press custom grids aid in accurate alignment of plate and paper during printing.
By aligning the plate to be printed with the marks on the grid the printer can then relate the placement of the paper to the plate.
The grids are custom printed by Takach Press to fit their Etching presses. A center line running length and width calibrated every 0.125."

Usually Ships in 1 to 2 Days
Table Top Protective Bed Cover Table Top Protective Bed Cover

Polycarbonate: This material is flexible. Available in two different thicknesses .062" and .093".
The thinner material (.062") is less likely to to absorb excess pressure under heavy applications.

Usually Ships in 3 to 5 Business Days
Starting Price $32.00
Zoom Spout Oiler Zoom Spout Oiler

Net 4 Fl. Oz.
Stock No. G84-620

Price: $3.25